There are three topside options for the the MarkSetBot. The current design is an inflatable set of stacked rings. The 2018 design is a dome (similar to a dome tent). The 2017 design is a truncated cone. The inflatable stacked ring assembly is the first option below. The dome assembly is the second option below. If you have the cone, scroll past the dome videos.
Inflatable Stacked Rings (2019)
The inflatable topside is very simple to assemble. The first video below shows how to unpack the topside. The second video shows how to pack it. After unpacking, use the pump for the pontoons to inflate the topside. Go to around 10 kpa.
The cone is assembled and disassembled in the following two videos:
The cone assembly is in 4 steps.
1) Attaching the double sided tape:
2) Installing the small hoop:
3) Installing the big hoop:
4) Mounting on the MarkSetBot: