If your Minn Kota prop isn't spinning and/or the right and left control isn't turning, watch the video below.
Here is a picture of the pin layout:
NOTE 1: The turning motor will only spin for 8sec at a time
NOTE 2: If you attach a volt meter to the steering motor leads, they will report a voltage even when the motor isn't being controlled. You will see around 11.9v at rest. When giving a steering command, you will get 13v'ish
The pins in the foot pedal map to the following colors:
3) Nothing (12V but isn't used with foot pedal - DO NOT TOUCH THIS PIN)
Please sign in to leave a comment.